|
“Nan Lung Steel &
Iron Corporation” was founded in 1960 and is the unique
and professional factory here in Taiwan for producing
king-size forged steel products and ring rolled flanges. |
|
1960 |
▼ Founded at Sungshan, Taipei. Stainless steel, high manganese steel was produced in the 3-Ton Electric Arc Furnace. |
1975 | ▼ [Shiang Kwang Machinery Company] was inaugurated for machining king-size casting parts. [Nan Cheng Steel & Iron Co., Ltd.] was established in Kaohsiung for production of high manganese steel, forgeable cast iron, permanent magnets. |
|
1961 |
▼ Added 500KG Electric Arc Furnace to produce stainless steel and high manganese steel. |
1976 |
▼ Certify the continuous operation line for making container angles. |
|
1963 |
▼ Added the biggest supersonic furnace in Taiwan (one set of 300KG,one set of 1000KG) for producing 13Cr. Stainless steel, high manganese steel, miniature train wheels, wear resisting cast parts and with outstanding heat treatment technique to supply to all cement plants, sand and stone plants all over Taiwan. |
1978 |
▼ [Kaohsiung Plant of Nan Lung Steel & Iron Corporation] was founded. |
|
1965 |
▼ Added 500KG, 250KG Air Hammer for production of steel balls. |
1980 |
▼ Added 2000 – Ton water hydraulic forging machine, the biggest free forging machine in Taiwan, for production of shafts, rollers, flanges. |
|
1968 |
▼ Added two (2) sets of 500KG Supersonic Furnace. |
1981 |
▼ The 3-Ton, 6-Ton Electric Arc Furnace started to produce casting parts and steel ingots. |
|
1969 |
▼ Added 1000Hp, 400HP Steel Rolling Machine for production of deformed bar. |
1982 | ▼ Installation of 20 – Ton Electric Arc Furnace and continuous casting machine was completed for production of small steel billets. |
|
1970 |
▼ Added one (1) set of 1500KG low frequency furnace. Awarded with the contract for production of tracks for US AAC Tanks. |
1983 |
▼ Hot rolling round bar production line was completed. |
|
1984 |
▼ Added 1000- Ton water hydraulic forging machine. |
||
|
1971 |
▼ The first set of metal analyzer in Taiwan was purchased. Deformed bar was awarded with National Logo (Cheng TZU Trademark.) |
1987 | ▼ Awarded with a contract for production of 25 Ton King – size steel slag containers for CSC, Chuanchi Heavy Industry, Japan and Ta Tung Steel & Iron Co. |
| 1972 | ▼ Two (2) sets of 1500KG low frequency furnace were developed under self R/D Program. Added 2-Ton Air Hammer. |
1993 |
▼ Added LFV vacuum refinery furnace thus enabling the continuous process from melting raw material to forging operation. Added 2000 –Ton oil hydraulic forging machine. Added king –size ring rolling machine. During the expansion period for the new generation rapid sizing and witching rolled steel equipment, this Corporation was capable of fist rate round steel bars and flat steel; bars. |
|
1973 |
▼ Honorably awarded with the prize as [ The Best Export Manufacturer] Mr. C. K. Yen, Vice President of the Republic of China paid a visit to this Plant. |
2005 |
▼ Added 1,500 Ton oil Hydraulic forging machine |
|
2006 |
▼ Added O.Diamoler 3,000mm Ring Rolling machine |
||
|
1974 |
▼ Lo Tung Branch was established for production of calcium carbide, silicon steel. Added the fully automatic steel ball forging and rolling machine. |
||
    |
|||
NAN LUNG STEEL & IRON CORPORATION
TAIPEI：1F, NO.13, LANE 13, TONG SHIN ST., NAN KAN CHU, TAIPEI TAIWAN 11556
TEL：886-2-27854130 ~ 3
FAX：886-2-27861142
KAOHSIUNG：NO.344, CHUNG AN ROAD, YEN CHAO DISTRICT KAOHSIUNG COUNTY TAIWAN 82446
TEL：886-7-6162931 ~ 4
FAX：886-7-6166789
